KROHNE Pressure transmitter for process pressure and level applications
OPTIBAR PM 5060 Pressure transmitter for process pressu…
Description
OPTIBAR PM 5060
Pressure transmitter for process pressure and level applications
·Rugged design with fully welded metallic diaphragm suited to high pressure ranges and hygienic requirements
·100 mbar…1000 bar / 1.45…14500 psi
·Various threads, flanges, aseptic and other connections
·2-wire 4…20 mA/HART®, FF, Profibus-PA, Bluetooth®
Specifications
Depending on selected device configuration
General information
| Product type | Pressure transmitter |
| Product family name | OPTIBAR |
| Product positioning | For all hygienic and non-hygienic process pressure and level applications |
| Measurement principle | Hydrostatic |
| Measured media | Liquids, Gases, Steam |
| Measuring point | Open tank |
Operating conditions
| Process pressure | max. 1000 bar/ 14500 psi |
| Process temperature | -40…+150°C/ -40…+302°F With optional diaphragm seals up to +400°C / +752°F |
Materials
| Diaphragm | Austenitic stainless steel (1.4404/316L), Nickel-chrome-molybdenum-tungsten alloy (2.4819/Alloy C276), Cobalt-Chromium-Nickel-Molybdenum alloy (2.4711 / Alloy 1058) |
| Fill fluid | Silicone oil, Halocarbon oil, Dry measuring cell (without fill fluid), Food grade oils (FDA listed), Medical grade white oil (FDA conform) |
| Measuring cell seal | Ethylene propylene diene monomer (EPDM), Fluoroelastomer rubber (FKM), Perfluoroelastomer rubber (FFKM), Without (fully welded) |
Process connections
| Flange connections | EN (1092-1): DN32…100 ASME (B 16.5): 1…4″ |
| Thread connections |
Male:
G½ (EN 837-1)
G½, G1, G1½ (DIN 3852)
G½ front flush (DIN 3852)
G1 front flush (cone 40°, cone 33.4°)
Hygienic G1 for hygienic adapters
1 NPT front flush
¼ NPT, ½ NPT
M20 x 1.5 (EN 837-1)
Female:
½ NPT, ¼ NPT
|
| Hygienic adapters |
Clamp (DIN 32676): DN40, DN50
Clamp (ISO 2852): 40, 51
Tri-Clamp: 1½”, 2″
Collar ferrule (SMS 1147): 38 mm, 51 mm
Collar ferrule (DIN 11851): DN25, DN40, DN50
Collar ferrule (DIN 11864-1A): DN40, DN50
Flange with collar (DIN 11864-2A): DN40, DN50
Aseptic clamp union (DIN 11864-3A): DN40, DN50
VARIVENT®: N, F
Hygienic fitting with compression nut: F40
NEUMO BioControl®: DN50, DN65, DN80
|
Approvals/Standards
| Certificates/Approvals Ex | ATEX, IECEx, NEPSI |
| Certificates/Approvals Hygienic | FDA, 3A, EHEDG, EC 1935/2004 |
| Certificates/Approvals Marine | CCS, DNV, GL, NK |
| Certificates/Approvals Others | Pressure Equipment Directive (PED) |
| Certificates/Approvals Safety | SIL 2/3 |
Communication
| Analogue outputs | 4…20 mA |
| Digital outputs | FOUNDATION™ fieldbus, HART®, Profibus-PA |
Overview
The OPTIBAR PM 5060 is a pressure transmitter for process pressure and level measurement in hygienic and non-hygienic applications with gases, liquids and steam. It can be used in open tanks and – as dual version for electronic differential pressure measurement – also in closed vessels. The pressure device features a piezoresistive or a strain gauge metallic diaphragm. Depending on the measuring cell, the pressure transmitter can operate over a wide process pressure range from 100 mbar / 1.45 psi up to 1000 bar / 14500 psi.
Show more